Conquest Ground Penetrating Radar

We are selling one of our demonstration Conquest with PCD. For details look here...

Conquest ground penetrating radar Conquest GPR is designed for safe, non-destructive evaluation of concrete structures. Conquest offers rapid on-site imaging for cutting, coring, drilling or characterization of concrete slabs with little or no design drawings. The Conquest uses radio waves to locate objects of differing dielectric constant. Therefore materials such as plastics, metals, and filling material can be located.

safe and easy to use
Precise analysis at different "depth slices"
On-site processing of data
independent, completely self-contained operation

Details

The system can analyze concrete at depths of up to 500mm (deeper in some instances), unlike ferromagnetic equipment with limits of 150-200mm. The system is simple to use and only require one operator. Scans can be completed in reconnaissance mode (which provides a concrete slab profile) or along grid lines to create 3D models of the concrete. Conquest™ provides the best and most cost-effective non-destructive concrete evaluation solution on the market.

3D Mapping

Collecting a grid of data results using the grid maps creates a data cube or 3D volume that can be visualized as a series of 2.5 cm thick depth slices or as a solid.

System Configurations

The standard Conquest system is optimal for applications which require quick on-site results. The Conquest Enhanced system expands the standard system with post acquisition analysis and colour printing using the Conquest View PC software. This configuration supports users who prepare engineering reports on-site and in a hurry.

PCD

The optional Power cable Detection maps the location of current carrying cables by detecting the magnetic field created when AC current flowing at 50 Hz. The Conquest detects current carrying cable best when the travel of the sensor head is perpendicular to the cable. In line scan mode the PCD profile appears under the GPR cross section image. A 2D image can also be constructed using Grid Scan data.

Battery

Whilst the Conquest is usually run using typical 240V mains power it can also be purchased with the Power pack option. This is can be used for at least 3hrs of use on sites which mains power is not available.

Additional Information

To download any of the documents simply either click on them, or right click and choose 'Save As'. To view these documents you will need the the free Adobe Viewer which can be downloaded from the link at the bottom of the page.