Linked In YouTube Google Plus
E31.2 E32.2

Positector SST - Soluble Salt Tester

Positector-SSTThe PosiTector SST Soluble Salt Tester measures the concentration of soluble salts on metal surfaces in accordance with ISO 8502-6, 8502-9.

The test is conducted before coating and after surface blasting to confirm surface salt levels are low enough to prevent corrosion issues and the attraction of water beneath a permeable coating, which can result in bubbling and coating failure. 

Theory

A soluble salt tester measures the quantity of soluble salts on a substrate. To do so, deionized water is washed over the surface and collected, allowing any soluble salts to dissolve into it.

The greater the soluble salt contamination on the surface, the higher the conductivity of the water. This increase can be measured, and after some calculation (automatically performed by the PosiTector SST in accordance with ISO 8502-9), the concentration of soluble salts on the substrate can be established.

The PosiTector SST includes a certified and traceable conductivity probe specifically designed for ISO 8502-6,9. Included with each probe is a Long Form Certificate of Calibration. The following parameters are measured by the PosiTector SST.

  • Conductivity (µS/cm)
  • Sampling Temperature (C° or F°) normalized to 25°C
  • Test duration

Using the measured conductivity value and the sample test volume (set within the gauge menu), the surface density of the salts (mg/m2 or µg/cm2) is automatically calculated in accordance with ISO 8502-9, saving the gauge operator time and eliminating the chance of a calculation error.

Bresle Method

defelsko-adhesive-patchThe Bresle method is used for extracting soluble salts from a metal surface. A patch is adhered to the surface, deionised water repeatedly washed into the patch to dissolve surface salts, then the conductivity is measured. The correct procedure for this test using a conventional adhesive patch or the improved, magnetic PosiPatch is explained below:

  • Adhesive patches should be removed from their backing and adhered to the metal surface, the PosiPatch is placed in its magnetic carrier and allowed to connect the surface. For either test method it is critical that the internal surface of the patch is not touched or allowed to contact anything but the metal surface to be tested.
  • The syringe is filled with 3 ml of deionised water and any air removed. For foam patches the metal syringe is pushed diagonally through the foam into the test patch. The PosiPatch plastic needle only needs to be inserted into the filling port.
  • For foam patches inject half the water into the patch use the syringe to remove all air, remove and expel the air from the syringe and fill the patch with the remainder of the 3mm water. The PosiPatch has an air permeable membrane and needs to only be filled with all 3mm of water, the air will escape during filling.
  • Start the SSG gauge timer and for an agreed time of test. During the test period extract and inject the water into the patch at least four times. 
  • Extract all 3 ml water and inject it into the Positector SST to measure conductivity and surface salts. 

How to select your gauge

order-guide
 

Specifications

 

 Range 

 0-500 μS/com

 0-2000 mg/m²

 0.0-200.0 μg/cm²

 Resolution *  1μS, 1mg/m², 0.1 μg/cm²
 Accuracy

 +/- 2 μS/cm (0-200 μS/cm)

 +/- 10 μS/cm (201-500 μS/cm)

 Temperature Range   0 - 50° C

 Normalization

 Temperature 

 25° C 
 Test Cell Volume  1 ml 

Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940

Standard Gauge Features

Storage of 250 readings - stored readings can be viewed or downloaded

Simple

  • Conductivity probe specifically designed for ISO 8502-6,9
  • Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2)
  • Easy 1-2-3 gauge interface guides users through the Bresle test method
  • Automatic storage of a background (blank) measurement — handy when performing multiple tests

Durable

  • Solvent, acid, oil, water and dust resistant – weatherproof
  • Shock-absorbing, protective rubber holster with belt clip
  • Two year warranty on body AND probe

Accurate

  • Long Form Certificate of Calibration showing traceability to NIST included
  • Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included.
  • Automatic temperature normalization and sample temperature reporting
  • Conforms to national and international standards including ISO, NACE, SSPC, IMO and US Navy

Versatile

  • PosiTector body accepts all PosiTector SST, 6000, 200, SPG, RTR, DPM, SHD and UTG probes easily converting from a soluble salt tester to a coating thickness gauge, surface profile gauge, dew point meter, shore hardness durometer or ultrasonic wall thickness gauge
  • Ideal for determination of water-soluble contaminants in non-metallic blast media
  • A selection of kits include everything needed to retrieve and analyse soluble salts on surfaces
  • Adjustable for various patch volumes
  • Selectable display languages
  • High contrast, reversible colour LCD with backlit display
  • Uses alkaline or rechargeable batteries (built-in charger)

Powerful

  • Tracks test duration in accordance with ISO 8502-6
  • Screen Capture – save screen images for record keeping and review
  • USB port for fast, simple connection to a PC and to supply continuous power
  • Every measurement is date and time stamped
  • Software updates via the internet keep your gauge current
  • PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required
  • Includes PosiSoft suite of software for viewing, analysing and reporting soluble salt data

Additional features on Advanced Gauge models

Includes ALL features shown above plus...

  • Storage of 100,000 readings in up to 1,000 batches
  • Batch annotation—add notes and change batch names with onscreen QWERTY keyboard
  • WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates
  • Data transfer via USB to a PC or via Bluetooth Wireless Technology to a mobile device, PC or printer
  • Store thickness, profile, environmental, wall thickness, hardness and salinity measurements in individual batches
  • PosiTector App - Mobile app connects PosiTector Advanced instruments to your iOS or Android smart device
  • Auto-pairing Bluetooth BLE connection
  • Easily create custom reports from your measurement data in seconds
  • Export readings to PosiSoft Desktop or synchronize readings with PosiSoft.net for further reporting and archival options

 

VIC:

Melbourne

This email address is being protected from spambots. You need JavaScript enabled to view it.

t (03) 9938 3830

f (03) 9938 3899

m 0428 315 502

NSW:

Sydney

e This email address is being protected from spambots. You need JavaScript enabled to view it.

t (02) 9986 1857

m 0418 381 709

QLD:

Brisbane

e This email address is being protected from spambots. You need JavaScript enabled to view it.

t (07) 3040 6166

m 0419 477 715

 

WA:

Perth (Head Office)

e This email address is being protected from spambots. You need JavaScript enabled to view it.

t (08) 9322 4020

m 0408 034 668

Linked In YouTube Google Plus