Flowability
Slump Test Set
UTC-0400E
The Slump Test method is most commonly used to determine the texture and workability of fresh concrete and to verify the similarity between batches of concrete. The UTC-0400E Slump Test Set is supplied either galvanized or paint coated to prevent corrosion.
Testing Procedure
The slump testing procedure consists of filling the slump cone in layers, compacting each layer with rodding, then taking away the slump cone and measuring the vertical drop of the concrete after it is no longer confined.
Components
The Slump Test Set are supplied complete with:
- Slump Cone Top Dia: 100 ±2 mm / Base Dia: 200 ±2 mm / Height: 300 ±2 mm
- Slump Base Plate 500x500x60 mm with Handle
- Slump Funnel, Galvanized Steel
- Tamping Rod Ø 16x600 mm
- Rubber Mallet
- Steel Ruler 300x1 mm
Standards
AS 1012.3.1
EN 12350-2
Concrete Flow Table Test Set
UTC-0510
The test set is designed for concrete mixes of high workability to determine a flow index. This is calculated as the average of the sample diameter after it is allowed to flow.
Components
The Concrete Flow Table Test Set is supplied complete with:
- Flow Table
- Double steel table, upper table measuring 700x700 mm hinged at one side to the lower table. The top table is inscribed and all parts are treated for corrosion resistance
- Flow Cone
- The stainless steel cone has a 130 ±2 mm top diameter, 200 ±2 mm base diameter and 200 ±2 mm height and 1.5 mm thickness
- Wooden Tamper
