Laboratory Mixers

PCTE offer a range of Mixers for your laboratory needs:

• UTG-0130 Laboratory Mixer 10L
• UTAS-0187 Heating Mantle for UTG-0130
• UTCM-0875E Manual Mortar Mixer 5L
• UTCM-0885E Automatic Programmable Mortar Mixer 5L
• UTC-0750-T Concrete Mixer Pan Type

Laboratory Mixer

The UTG-0130 is a 10 litre capacity mixer, designed to mix soil and asphalt samples to be used for mechanical tests such as compaction, indirect tensile, Marshall etc. The whisk turns at speed positions from 20 to 480 r.p.m and the mixing head from 10 to 240 r.p.m. The rotation speed can be easily adjusted between given values, by turning the control knob on the machine.

The mixer is equipped complete with 10L capacity stainless steel bowl and whisk. 

Technical Specifications

Heating Mantle

UTAS-0187

The bituminous mixture must be prepared at the prescribed temperature according to the EN standard. For this reason, the mixer can be equipped with a thermostatically controlled heater.

The Heating Mantle can be easily attached to the UTG-0131 Mixing Bowl. The apparatus is supplied complete with a digital thermostatic controller and PT100 temperature sensor.

The Heating Mantle must be ordered separately to the Laboratory Mixer.

Technical Specifications

Manual Mortar Mixer

UTCM-0875E

The 5L Manual Mortar Mixer can be used to combine cement pastes and mortars, to the requirements of most standards, including:

EN 196-1, 196-3, 413-2, 450-2, 480-1, 1015-2, 12617-4; ASTM C187, C305; AASHTO T129, T131, and T162.

On the lowest speed, the machine's mixing paddle has a 140 r.p.m revolving rate and a 62 r.p.m planetary motion. The revolving rate increases to 285 r.p.m and the planetary motion increases to 125 r.p.m when the machine is on high speed. The operator can easily change the speeds by flicking the switch on the front of the mixer. The machine comes complete with a sand filling apparatus, and has been designed so the bowl and beater can be easily fitted and removed.

The Manual Mortar Mixer comes supplied complete with:

• UTCM-0876 Bowl, 5L (approx.)
• UTCM-0878E Beater

Automatic Programmable Mortar Mixer

UTCM-0885E

The mixer is used to combine mortars and cement pastes to the requirement of standards. The mixing paddle has a planetary motion and is operated by a motor. The motor has microprocessor based speed and preset programs to meet all listed EN and ASTM standards, custom designed programs or manual mode. The machine has a mode button, which the operator can use to switch between programs. The mixing paddle has a revolving rate of 140 r.p.m in low speed. In high speed the revolving rate of the paddle increases to 285 r.p.m and has a planetary motion of 125 r.p.m.

The mixer is supplied complete with an automatic sand dispenser. After 30 seconds, the sand is automatically released. The operator can choose between 6 different programs, where the sand dispenser position, motor speed and duration of the mix can all be set differently. The mix time is shown on the display, and for efficient warning during critical time periods, the machine is equipped with a lamp.

The Automatic Programmable Mortar Mixer is supplied complete with:

• UTCM-0876 Bowl, 5L (approx.)
• UTCM-0878E Beater

Concrete Mixer Pan Type

UTC-0750-T

If high-quality specimens are to be manufactured, the efficient mixing of concrete is essential. For mixing small amounts of concrete, pan type mixers are the most suitable apparatus.

The UTC-0750-T Pan Type Concrete Mixer is designed to give efficient mixing of both dry and wet materials.

It has a removable mixing pan which tilts to allow easy access to the pan. This also allows for trouble-free emptying of the pan once the mixing operation is complete. The pan has a total volume of 108 litres but the effective capacity of the mixer is 56 litres.

The mixer head lifts clear to provide maximum access to the pan and holds the mixing blades at a constant depth during the mixing operation. The blades are adjustable, with different options to suit the different kinds and volume of materials to be mixed. The pan type mixer is also equipped with rubber wheels which provide high portability.

All parts of the mixer are non-corrosively painted and galvanized.