Moulds
Three Gang Moulds
PCTE can supply the following cement moulds. All mould dimensions and specifications comply with the related standards. All the moulds are made from steel and the internal surfaces are machined.
- 40x40x160 mm Three Gang Mould
- 50 mm Three Gang Cube Mould
The 40x40x160 mm mould has a surface hardness to a minimum HV400.
Technical Specifications
| Model | Dimensions | Prism Size | Weight (approx.) |
| UTCM-0892.4 | 300 x 190 x 70 mm | 40 x 40 x 160 mm | 12 kg |
| UTCM-0095 | 110 x 230 x 60 mm | 50 x 50 x 50 mm | 3 kg |
Two Gang Prism Shrinkage Mould
UTCM-0033A
The Two Gang Shrinkage Mould is used to measure the effect that aggregates have on the drying, shrinkage and length change of hardened cement paste, concrete and mortar. The Two Gang Shrinkage Mould is also used to determine the potential alkali reactivity of cement-aggregate combinations (mortar-bar method).
Reference rod should be ordered separately.
Shrinkage Moulds supplied complied with;
- Steel Insert
Technical Specifications
| Dimensions | Weight (approx.) | |
| UTCM-0033A | 330 x 190 x 70 mm | 4 kg |
