Servo Controlled Wide Test Space Electromechanical UTM 50 kN
UTM-8010, 50 kN capacity Servo Controlled Wide Test Space Electromechanical Universal Testing Machine is fully automatic and multi purpose versatile machine which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories.
The Machine is equipped with a servo motor and BC 100 TFT Graphics DataAcquisition and Control Unit. Flexural , breaking, bending, tensile, compression strenght, tensile adhesion and tensile bond strength, CBR, Marshall, tensile and weld shear force tests can be perform under load or displacement control by using suitable accessories up to the machine capacity on wide rande of materials, such as ceramic and terrazo tiles, naturel stone, adhesives for tiles, grouts for tiles clay and concrete roofing tiles, glass-fibre reinforced precast concrete products, thermal insulating products, plastering mortars, products for the protection and repair of concrete structure, soil and bituminous mixtures and welded fabric steel for the reinforcement of concrete.
The Testing Machine consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests.
User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single re-circulating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured by displacement transducer fitted to the lower crosshead. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.
Suitable accessories and different capacity loadcells should be ordered separately acc.to the test performed.
UTM-8010 supplied with 50 kN Capacity Load Cells
|
Max. Load |
50 kN |
|
Machine Class |
Class 1 starting from1% of the capacity |
|
Max. Vertical Test Space (without accessories) (Lower crosshead at middle stroke) |
Min. 200mm / Max. 400 mm (without accessories) |
|
Distance Between Columns |
850 mm |
|
Stroke |
100 mm |
|
Test Speed Range |
0,001-50 mm/min. |
|
Load Rate |
0,001-2 kN/s (Depend on specimen stiffness) |
|
Electrical Requirement |
220-240V, 50-60Hz, 1 phase. |
|
Weight (approx.) |
310 kg |
