Mortar Testing
Workable Life, Stiffening Time and Setting Time Apparatus
UTCM-0664
The apparatus is used for determining the stiffening time of repair products and systems comprising hydraulic based mortar and concrete (CC), including those modified by the addition of polymers (PCC) and workable life of fresh mortar after the mixing procedures.
The Apparatus consist of a vertical loading pillar with a base. Supplied complete with a brass penetration rod with washer and a sample container (Ø75x75 mm aluminum).
UTC-0705 Needle Set for concrete setting time test acc.to ASTM should be ordered separately
UTW-0637 Digital Balance for the initial setting time, workable life and 
stıffening time should be ordered separately, as well.
Also, for determining concrete final setting time, instead of UTW-0637, UTW-0654 should be ordered separately.
Technical Specifications
| Dimensions | 400 x 400 x 600 mm |
| Weight (approx.) | 10 kg |
Plunger Penetration Apparatus
UTCM-0665
The UTEST Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus consists of a base to place the test cup and a vertical column holding the penetration plunger assembly. The drop default height is adjusted to 100 mm. The plunger assembly weight is 90 g.
The Plunger Penetration Apparatus is supplied complete with;
- Test cup, Ø 80 mm x 70 mm
- Tamper
Technical Specifications
| Dimensions | 200 x 200 x 600 mm |
| Weight (approx.) | 6 kg |
Solid Mould
UTCM-0670
The UTCM-0670 Solid Mould is used to determine the water retention of masonry cement specimens.
Technical Specifications
| Dimensions | 100 x 100 x 25 mm |
| Weight (approx.) | 0.1 kg |
