Linked In YouTube Google Plus

Cold Test Bending Machine

UTM-8400UTM-8400-01

UTM-8400 Cold Bending Machine has been designed for the bending and re-bending tests on reinforcing bars, wire rod and wire for concrete in accordance with the requirements of EN ISO 15630-1.

The test piece is bent over a mandrel. The angle of bend and the diameter of the mandrel is chosen in accordance with the relevant product standard EN 10080.

The bend test is performed with a minimum angle of bend of 180° over a mandrel according to EN ISO 15630-1.

For the re-bend test, the test piece is first bent with a minimum angle of bend of 90° over a mandrel. Once this has occurred, the aging treatment is applied and the test piece is then bent back up to a minimum of 20° according to EN ISO 15630-1.

After the tests, the tension (lower) side of the test piece is visually inspected for cracks or fissure.

Mandrels for bend and re-bend tests should be ordered separately.

Technical Specifications

Maximum Loading Capacity

150 kN

Power

750 W

Piston Travel Maximum Speed

1 mm/sec.

Dimensions

1500 x 665 x 1050mm

Weight Approx.

540 kg

Additional Information

Cold Test Bending Machine Brochure

VIC:

Melbourne

This email address is being protected from spambots. You need JavaScript enabled to view it.

t (03) 9938 3830

m 0428 315 502

NSW:

Sydney

e This email address is being protected from spambots. You need JavaScript enabled to view it.

t (02) 9986 1857

m 0418 381 709

QLD:

Brisbane

e This email address is being protected from spambots. You need JavaScript enabled to view it.

t (07) 3040 6166

m 0419 477 715

WA:

Perth (Head Office)

e This email address is being protected from spambots. You need JavaScript enabled to view it. 

or This email address is being protected from spambots. You need JavaScript enabled to view it.

t (08) 9322 4020

m Warren: 0498 800 373 or Reuben: 0408 034 668

Linked In YouTube Google Plus