Linked In YouTube

Multiplex Machines

UTM-0107 is a Multiplex machine with a servo motor and LCD display. It is the frame only.

For analogue measurement, the frame can be completed with load ring and dial gauge. These parts should be ordered separately.

If the machine will be used with a data logger, the unilogger (UTG-0325), load cell and displacement transducers should be ordered separately.

Uniaxial, Triaxial, Marshall and CBR tests can be completed with the UTM-0107 by adding the test accessories.

UTM-0108 and UTM-0109 are Multiplex machines with a servo motor and BC100 TFT Graphics Data Acquisition and Control System. The UTM-0108 has a capacity of 50kn and the UTM-0109 has a capacity of 100kn.

UTM-0107UTM-0108UTM-0109 copy

The Multiplex Machine is used to perform Uniaxial, CBR and Marshall Tests. The UTM-0108 is equipped with a servo motor and BC100 TFT graphics data acquisition and control system. The apparatus is capable of doing tests with the speed range of 0.00001 mm/min to 51 mm/min. The machine can also be used to carry out load controlled tests. The UTM-0108 has been designed with a sturdy and compact two column frame, with an adjustable upper cross beam.

Multiplex Machine is supplied complete with;

  • Load Cell
  • Displacement Transducer, 25x0,001 mm

 Technical Specifications

 Model   UTM-0109   UTM-0108   UTM-0107 

 Test Speed 

 0.00001– 51 mm/min   0.00001– 51 mm/min 

 0.00001– 51 mm/min 

 Capacity 

 100 kN   50 kN 

 50 kN 

 Dimensions 

 710 x 555 x 1910 mm   550 x 700 x 1200 mm 

 550 x 700 x 1200 mm 

 Weight (approx.) 

 235 kg   102 kg 

 102 kg 

 Vertical Daylight 

 610 mm 

 NA 

 NA 

 Horizontal Daylight 

 370 mm   NA   NA 

 Power 

 1000 W   NA   NA 

 

Test accessories should be ordered separately according to the tests.

To perform Uniaxial tests:

 UTM-0115   Compression Platens, used to perform uniaxial and unconfined compression tests. Supplied complete with ball seating assembly. 

 

To perform Triaxial tests:

 Typical configuration of system for different tests (UU-CU-CD) 

 Product Code 

 Description 

 UU 

 UU-CU-CD 

 UTGM-0010  

 Load Cell 5 k N 

 1 

 1 

 UTGM-0062 

 Linear Potentiometric Displacement Transducer, 25 mm  

 1 

 1 

 UTS-0400 

 UTS-0401 

 Triaxial Cell** 

 1 

 1 

 UTS-0405 

 Block with One Connection Line for Triaxial Test Cells 

 1 

 - 

 UTS-0406 

 Block with 3 Connection Lines for Triaxial Test Cells 

 - 

 1 

 UTGM-0110 

 Pressure Transducer 

 1 

 3 

 UTS-0408 

 Oil and Water Constant Pressure System 

 1 

 2 

 UTS-0415 

 Automatic Volume Change Unit 

 - 

 1 

 UTG-0320 

 Static Unilogger4 Channels 

 - 

 1 

 UTS-0416 

 Software to Perform UU Triaxial Tests 

 1 

 1 

 UTS-0417 

 Software to Perform CU-CD Triaxial Tests 

 - 

 1 

 UTS-1330 and

 UTGP-1140 

 De-Airing Water Tank, 7 L. and Hose 

 1 

 1 

 

To perform Marshall tests:

 UTAS-0057 

 Breaking Head Stability Mould, cast iron,

for 4” (101,6 mm) Marshall Samples 

 UTAS-0058 

 Breaking Head Stability Mould, cast iron,

for 6” (152,4 mm) Marshall Samples 

 

 Adaptor for Breaking Head 

 

To perform CBR tests:

 UTS-0870   CBR Penetration piston, used to perform CBR tests 

 

BC 100 Unit TFT Graphic Display Data Acquisition and Control UnitBC100-Detail

BC100 TFT Graphic Display Data Acquisition and Control Unit is used to control the machine and processing of data from load-cells, pressure transducers or displacement transducers, which are fitted to the machine.

The front panel of the unit consists of a 800x480 pixel 65535 colour-resistive touch screen and function keys. All the operations can be controlled using this front panel. The BC100 includes 4 analogue channels for load cells, pressure transducers or displacement transducers.

BC100 TFT unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option easily, to activate the option or enter a numeric value to set the test parameters. The BC100 digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphs.

BC100 unit offers many addition unique features. You can save more than 10000 test results in its internal memory. BC100 unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Thanks to its built-in internet protocol suite, every aspect of BC100 device can be controlled remotely from anywhere around the world.

  • Calibration Range Class 1 from 2% of the full capacity
  • Maximum piston travel 80 mm
  • Distance between columns 260 mm

Main Features

  • Can make test with displacement or load control
  • Displacement control from 0.00001 mm/minute to 50,8 mm/minute
  • Pace rate control from 0.01 kN/s to 2 kN/s (respect to stiffness)

When the machine used for CBR TestEkran-CBR

  • Calculates corrected CBR value at 2.5 and 5 mm the digital unit saves the load value at user defined displacement values such 0.625, 1.25, 1.875, 2.5, 3.75, 5, 7.5, 10, 12.5 mm
  • The load corresponds to the displacements corrected respect to the linear region of the data has also saved
  • The % CBR at 2.5 mm and % CBR at 5 mm is also automatically calculated and saved

When the machine used for Marshall  Test

  • Automatically calculates flow and stability values.

 When the machine used for Triaxial TestEkran-Tri 01

  • It shows stress value corrected respect to the displacement sensor.

When the machine used for Load Control Type Tests different type of specimens

  • The stress is shown.
  • Real time display of test graph.
  • CPU card with 32-bit ARM RISC architecture
  • Permanent storage capacity up to 10000 test results
  • 4 analogue channels (it would be simultaneous or not depending on the application at the factory) for one analogue channel for high capacity load cell, one analogue channel for displacement transducer, one analogue channel for low capacity load cell and one analogue channel for pressure transducer for oil-water constant pressure unit
  • Programmable digital gain adjustment for load-cell, pressure transducers, strain-gauge based sensors, potentiometric sensors, voltage and current transmitters
  • 1/256000 points resolution per channel
  • 10 data per second sample rate for each channel
  • Ethernet connecting for computer interface
  • 800x480 resolution 65535 colour TFT-LCD industrial touchscreen
  • 4 main function keys
  • Multi-language support
  • 3 different unit system selection; kN, Ton and Lb
  • Real-time clock and date
  • Test result visualization and memory management interface
  • Remote connection through Ethernet
  • USB flash disc for importing test results and for firmware
  • USB printer support for inkjet and laser printers (ask for compatible models)
  • Camera support for real-time video recording during test (ask for compatible models)
  • Free of charge PC software for the test control and advanced report generation

All UTEST software including Marshall, CBR, Triaxial (UU,CU,CD), Uniaxial etc. can be used with multiplex machines.

Additional Information

Multiplex Machines Brochure

VIC:

Stuart McCurdy

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

M: 0428 315 502

 

Monica Simhadri

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

M: 0488 331 244

QLD:

Michael Dubery

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

T: (07) 3040 6166

M: 0419 477 715

NZ:

Jun Han Lee

T: +64 9 377 6778

E: jThis email address is being protected from spambots. You need JavaScript enabled to view it.

M: +64 274 738 758

WA:

(Head Office)

T: (08) 9322 4020

Derek Burns

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

M: 0498 800 373

Reuben Barnes

E: rThis email address is being protected from spambots. You need JavaScript enabled to view it.

M: 0408 034 668

NSW:

William Ward

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

T: (02) 9453 9999

M: 0418 381 709

Warehouse / Service Centre

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

T: (02) 9453 9941

Linked In YouTube