Concrete Compression Strength Test Machine
Calibration
Calibration Technicians can view Raw measurement values and choose set points for the complete calibration range.
Touchscreen Controller
Direct control of tests, including specimen size, loading settings, pace rate, graphs and data export.
Hydraulic Power Pack
A dual stage power pack is used to supply the required oil to the load frames. Featuring PID control, a rapid approach pump and a safety valve (maximum pressure valve).
Centering Tool
Includes fixture for centering specimens, compatible with the Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders
Hydraulic Piston and Distance Pieces
A 250 mm diamater piston converts pressure to force. Distance pieces of 100 mm, 50 mm, 30 mm height are included. Users should order an additonal 100 mm distance piece if they wish to test cube samples 100 mm or smaller.
Loading Platens
Bottom platten and top plattens of 300 mm diameter with speherical seating assembly, 53 HRC Surface hardness with flatness tollerance of 0.003 mm.
Computer Software
UTEST software is provided to perform compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement, mortar and masonary units/blocks. Some tests will require an additional flexural frame and apropriate flexural test components, software requires a Windows PC with networking access.
-
Calibration
Calibration Technicians can view Raw measurement values and choose set points for the complete calibration range. -
Touchscreen Controller
Direct control of tests, including specimen size, loading settings, pace rate, graphs and data export. -
Welded Frame
Welded steel walled frame with a single acting piston. -
Safety Doors
Removable transparent front and rear safety doors with magnetic interlock. -
Hydraulic Power Pack
A dual stage power pack is used to supply the required oil to the load frames. Featuring PID control, a rapid approach pump and a safety valve (maximum pressure valve). -
Centering Tool
Includes fixture for centering specimens, compatible with the Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders -
Hydraulic Piston and Distance Pieces
A 250 mm diamater piston converts pressure to force. Distance pieces of 100 mm, 50 mm, 30 mm height are included. Users should order an additonal 100 mm distance piece if they wish to test cube samples 100 mm or smaller. -
Loading Platens
Bottom platten and top plattens of 300 mm diameter with speherical seating assembly, 53 HRC Surface hardness with flatness tollerance of 0.003 mm. -
Computer Software
UTEST software is provided to perform compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement, mortar and masonary units/blocks. Some tests will require an additional flexural frame and apropriate flexural test components, software requires a Windows PC with networking access.
Hover mouse over targets for more information.
